Clean Slabs Ready for New Flooring

Adhesive removal in Asheville to prepare concrete for epoxy, stain, or polish

When old carpet glue, tile mastic, or vinyl adhesive covers your concrete, you cannot install a new floor system until the surface is clean and flat. In Asheville, where older homes often have layers of past flooring glued directly to the slab, removing these residues without damaging the concrete requires professional grinding and stripping tools. Iconic.Co, LLC uses industrial equipment and dust control systems to strip away adhesives, leaving a bond-ready surface that accepts epoxy, stain, or polish without delamination or discoloration.

The removal process involves grinding the concrete with coarse abrasives to break up and lift the adhesive, followed by finer passes to smooth the surface and remove any remaining residue. This method works on carpet glue, black mastic, thinset, and other bonded materials commonly found in renovations throughout areas like Kenilworth and Montford. The result is a clean, flat slab with the proper profile for accepting new coatings or finishes.

Contact the team for fast, reliable removal to prep your floors correctly in Asheville.

Why Locals Choose This Option

You receive a thorough removal process that clears the slab without leaving soft spots, bumps, or residue that would interfere with your new flooring. Professional grinding equipment removes adhesive more effectively than hand scraping or chemical strippers, and dust containment keeps the work area cleaner during the process. In Asheville, where basements and garages often reveal old glue after carpet or tile removal, this service is essential before moving forward with any coating or stain.

After the adhesive is removed, you will notice the concrete is level, free of sticky patches, and ready to accept primers, sealers, or coatings without bubbling or peeling. Iconic.Co, LLC pays attention to edges, corners, and transitions where adhesive tends to build up, ensuring the entire surface is prepared uniformly. The cleaned slab allows new flooring systems to bond properly and perform as intended.

The service includes grinding, adhesive removal, and basic surface cleaning. It does not include repair of cracks or damage revealed after removal, moving of furniture or appliances, or disposal of old flooring materials. The slab must be structurally sound, and any moisture or drainage issues should be addressed before new flooring is installed.

How Our Process Works

These questions address the concerns homeowners and contractors have when preparing concrete for new flooring in Asheville.

What types of adhesive can be removed
The service removes carpet glue, black mastic, vinyl adhesive, thinset, and most other bonded residues. Extremely thick or rubberized coatings may require additional passes or chemical pre-treatment.
How long does adhesive removal take
Most single-room or garage-sized areas take one day including grinding and cleanup. Larger spaces or heavily coated slabs in Asheville may require additional time.
What happens if the concrete is damaged under the glue
Grinding may reveal cracks, low spots, or surface defects that were hidden by the adhesive. These can be repaired before applying new flooring, but they are not included in the adhesive removal service.
Why is grinding better than chemical strippers
Grinding mechanically removes the adhesive and creates a clean, textured surface that new coatings can bond to. Chemical strippers often leave residues that interfere with adhesion and can be hazardous to work with indoors.
What maintenance does the cleaned concrete require
Once cleaned, the concrete should be kept dry and free of new contaminants until the next flooring system is applied. Dust and debris can be swept or vacuumed as needed.

Adhesive removal provides a critical first step in any flooring renovation, ensuring the slab is ready for epoxy, stain, or polish without delays or failures caused by poor surface prep. Schedule a quote to prepare your Asheville property for a durable, professional finish.